Lubi pumps

3"(80mm) Radial flow

Submersible Motor & Pumps for Deep Wells 80 mm

Construction

  • Submersible motor & pumps for deep wells of 3" (DN 80 mm).
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Radial flow impellers. N51BH,N52BH
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.

    Performance Range

  • Head range up to 60 meters.
  • Flow range up to 6.0 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max.Sand quantity in the water : 50 g/m³.
  • Max.Starts per hour : 30 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.
Lubi Radial flow
Sendmail
 

3"(80mm) Submersible H3 Motor

Quality for your borewell :

H3 Motors are suitable for 3” borewell, and operate with permanent split capacitor. H3 Motors are the choice for dependable, maintenance-free operation, and provides a long life for your submersible pump operation.

Product features :

  • Stainless steel outer shell and shaft.
  • Maintenance free lubricated ball bearings.
  • Rotation: Counter clock wise.
  • Vertical & horizontal mounting position.
  • High efficiency electrical design.(lower operating cost, Lower winding temperature).
  • Cooling & lubrication by non toxic fluid.
  • Motor for permanent split capacitor.
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection : IP 68.
  • Insulation class : F.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor : 8cm/sec.
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 30.
  • Maximum submerged depth : 350 mts.
  • Ratings : Single phase 0.37 KW - 0.75KW.
  • Voltages : Single phase 230V +5%, -15% - 50Hz.
  • Thrust load : 1000 N.
  • Standard motor cable : Suitable for operation in drinking water. 1 X 1.5mm² X 3mts.
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
  • Special voltages, execution and material versions available on customer's request.
Lubi Submersible H3 Motor
Sendmail
 

4" (100mm) Radial flow & Mixed flow

Submersible Motor & Pumps for Deep Wells 100 mm

Construction
  • Submersible motor & pumps for deep wells of 4" (DN 100 mm).
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • S Type Pump are completely manufactured out of AISI 304 Sheet.
  • Impellers :
        Radial flow impellers. N4A,N6,N8,N10,N12.
        Mixed flow impellers. N15A,N15H,N20A,N25,G30,N31,N40.
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 380 meters.
  • Flow range up to 25 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 30 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • N25 Pump with Bronze Impeller.
  • G30 Pump with Stainless Steel Impeller.
  • G30 Pump with Complete in Bronze.
Lubi Radial flow & Mixed flow
Sendmail
 

4" (100mm) Radial flow & Mixed flow

Stainless Steel Submersible Motor & Pumps for Deep Wells 100 mm

Construction
  • Submersible motor & pumps for deep wells of 4" (DN 100 mm).
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • W Type Pump are completely manufactured out of AISI 304 Sheet.
  • Impellers :
        Radial flow impellers. W1A,W2A,W3A,W5A.
        Mixed flow impellers. W8A,W14A.
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 583 meters.
  • Flow range up to 19 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 30 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • Also available in AISI 316 Material.
Lubi Radial flow & Mixed flow
Sendmail
 

4"(100mm) Submersible H4 Motor

Quality for your borewell :

H4 Motors are for operation with permanent split capacitor. H4 Motors are the choice for dependable, maintenance-free operation, and provide a long life for your submersible pump operation.

Product features :

  • Stainless outer shell and shaft.
  • Maintenance free lubricated bearings.
  • Rotation: Single phase : CCW.
                      Three phase : CCW and CW.
  • Vertical or horizontal mounting position.
  • High efficiency electrical design.(lower operating cost).
  • Tropicalized design. (Lower winding temperature).
  • Cooling & lubrication by non toxic fluid.
  • Motor for permanent split capacitor.
  • 4" NEMA coupling flange.
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 68.
  • Insulation class : F.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor : 8cm/sec.
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 30.
  • Maximum submerged depth : 350 mts.
  • Ratings : Single phase 0.37 KW - 2.20KW.
                      Three phase 0.37 KW - 5.50 KW.
  • Voltages : Single phase 230V +5%, -15% - 50Hz.
                       Three phase 230V +5%, -15% - 50Hz.
                                          400V +10%, -15% - 50Hz.
  • Thrust load : 3000 N (0.37 KW - 3.00 KW).
                           4000 N (3.70 KW - 5.50 KW).
  • Standard motor cable : Suitable for operation in drinking water 1 X 1.5mm² X 3mts
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi Submersible H4 Motor
Sendmail
 

4"(100mm) Submersible L4 Motor

Quality for your borewell :

L4 Motors are designed so that they can be easily rewound and repaired. They are high torque capacitor start and run design. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
  • Water lubricated radial and axial thrust bearing.
  • Corrosion resistant AISI 304 S.S. Stator jacket.
  • Non-contaminating water filling designed.
  • High efficiency electrical design, lower operating cost.
  • Tropicalized design. (Lower winding temperature.)
  • Capacitor start and run design.
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 58.
  • Insulation class : B.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor : 8cm/sec.
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 30.
  • Maximum submerged depth : 350 mts.
  • Ratings : Single phase 0.37 KW - 2.20KW.
                      Three phase 0.37 KW - 5.50 KW.
  • Voltages : Single phase 230V +5%, -15% - 50Hz.
                       Three phase 230V +5%, -15% - 50Hz.
                                          400V +10%, -15% - 50Hz.
  • Thrust load : 4000 N.
  • Standard motor cable : Suitable for operation in drinking water
              1 X 1.5mm² X 3mts. Single phase 0.37 KW - 0.75 KW
              1 X 2.5mm² X 3mts. Single phase 1.10 KW - 2.20 KW
              1 X 1.5mm² X 3mts. Three phase 0.37 KW - 4.40 KW
              1 X 2.5mm² X 3mts. Three phase 5.50 KW
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
  • Special voltages, execution and material versions available on customer's request.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi Submersible L4 Motor
Sendmail
 

6"(150mm) Radial flow & Mixed flow

Submersible Motor & Pumps for Deep Wells of 150 mm

Construction

  • Submersible motor & pumps for deep wells of 6" (DN 150mm)
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Radial flow impellers.
          K30A,K40A,K50A,K60A,K70A,K80A,K100A,
          N30A,N40A,N50A,N60A,N70A,N80A,N100A.
    Mixed flow impellers. M10A,M12A,M16A,M20A,B25A,B30A.
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 490 meters.
  • Flow range up to 84 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 20 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • N Series Pump with Bronze Suction case & Delivery casing.
  • K, M & B Series available with Grey Iron & Stainless Steel Impeller.
Lubi 6 150mm Radial flow & Mixed flow
Sendmail
 

6"(150mm) Radial flow & Mixed flow

Stainless Steel Submersible Motor & Pumps for Deep Wells of 150 mm

Construction

  • Submersible motor & pumps for deep wells of 6" (DN 150mm)
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Radial flow impellers.
          J9,J12,J15,J17,J19,J21,J24,J27,J10H,J13H,J16H,J18H.
    Mixed flow impellers.
          W30,W46,W60.
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 750 meters.
  • Flow range up to 78 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 20 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • Also available in AISI 316 Material.
Lubi Pumps for Deep Wells of 150 mm
Sendmail
 

6"(150mm) Submersible H4 Motors

Quality for your borewell :

H6 Motors are Oil filled Submersible Motors suitable for minimum 6” borewell and three phase power supply. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Stainless steel outer shell and shaft.
  • Maintenance free lubricated ball bearings.
  • Mechanical shaft seal.
  • Rotation : CCW and CW.
  • Vertical & horizontal mounting position.
  • High efficiency electrical design.(lower operating cost)
  • Tropicalized design. (Lower winding temperature.)
  • Cooling & lubrication by non toxic fluid.
  • 6" NEMA coupling flange.
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 68.
  • Insulation class : F.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor :
              15cm/sec. (3.00 KW - 15.0 KW)
              30cm/sec. (16.5 KW - 37.0 KW)
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 20.
  • Maximum submerged depth : 350 mts.
  • Special voltages, execution and material versions available on customer's request.
  • Ratings : Three phase 3.00 KW - 37.0 KW.
  • Voltages: Three phase 400V +10%, -15% - 50Hz.
  • Thrust load:
              10000 N (3.00 KW - 22.0 KW)
              20000 N (26.0 KW - 37.0 KW)
  • Standard motor cable : Suitable for operation in drinking water
              1 X 1.5 mm² X 3mts. (3.00 KW - 7.50 KW)
              1 X 2.5 mm² X 3mts. (9.30 KW)
              1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
              1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
              1 X 10.0 mm² X 3mts. (18.5 KW - 22.0 KW)
              1 X 16.0 mm² X 3mts. (26.0 KW - 30.0 KW)
              1 X 25.0 mm² X 3mts. (37.0 KW)
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Built-in PT 100 temperature sensor.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi 6” borewell and three phase
Sendmail
 

6"(150mm) Submersible L6 Motor

Quality for your borewell :

L6 Motors are water filled motors which are easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
  • Water lubricated radial and axial thrust bearing.
  • Corrosion resistant AISI 304 S.S. Stator jacket.
  • Non-contaminating water filling Design.
  • High efficiency electrical design, lower operating cost.
  • Tropicalized design. (Lower winding temperature.)
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 58.
  • Insulation class : B.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor :
    15cm/sec. (3.00 KW - 15.0 KW)
    30cm/sec. (16.5 KW - 37.0 KW)
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 20.
  • Maximum submerged depth : 350 mts.
  • Ratings: Three phase 3.00 KW - 37.0 KW.
  • Voltages: Three phase 400V +10%, -15% - 50Hz.
  • Thrust load : 15500 N (3.00 KW - 11.0 KW).
    27500 N (13.0 KW - 37.0 KW).
  • Standard motor cable : Suitable for operation in drinking water.
              1 X 1.5mm² X 3mts.(3.00 KW - 7.50 KW)
              1 X 2.5 mm² X 3mts. (9.30 KW)
              1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
              1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
              1 X 10.0 mm²X 3mts. (18.5 KW - 22.0 KW)
              1 X 16.0 mm²X 3mts. (26.0 KW - 30.0 KW)
              1 X 25.0 mm²X 3mts. (37.0 KW)
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Mechanical seal.
  • Built-in PT 100 temperature sensor.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi Submersible L6 Motor
Sendmail
 

6"(150mm) Submersible L6 Motor

Quality for your borewell :

L6 Motors are water filled motors which are easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
  • Water lubricated radial and axial thrust bearing.
  • Corrosion resistant AISI 304 S.S. Stator jacket.
  • Non-contaminating water filling Design.
  • High efficiency electrical design, lower operating cost.
  • Tropicalized design. (Lower winding temperature.)
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 58.
  • Insulation class : B.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor :
              15cm/sec. (3.00 KW - 15.0 KW)
              30cm/sec. (16.5 KW - 37.0 KW)
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 20.
  • Maximum submerged depth : 350 mts.
  • Ratings: Three phase 3.00 KW - 37.0 KW.
  • Voltages: Three phase 400V +10%, -15% - 50Hz.
  • Thrust load : 15500 N (3.00 KW - 11.0 KW).
                           27500 N (13.0 KW - 37.0 KW).
  • Standard motor cable : Suitable for operation in drinking water.
              1 X 1.5mm² X 3mts.(3.00 KW - 7.50 KW)
              1 X 2.5 mm² X 3mts. (9.30 KW)
              1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
              1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
              1 X 10.0 mm²X 3mts. (18.5 KW - 22.0 KW)
              1 X 16.0 mm²X 3mts. (26.0 KW - 30.0 KW)
              1 X 25.0 mm²X 3mts. (37.0 KW)
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Mechanical seal.
  • Built-in PT 100 temperature sensor.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi L6 Motors are water filled motors
Sendmail
 

8" (200mm) Radial Flow & Mixed flow

Stainless Steel Submersible Motor & Pumps for Deep Wells 200 mm

Construction

  • Submersible motor & pumps for deep wells of 8" (DN 200mm)
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Mixed flow impellers.
          W77,W95.
  • Connection: Screwed pipe connection

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 410 meters.
  • Flow range up to 120 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 20 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.
Lubi Pumps for Deep Wells 200 mm
Sendmail
 

8" (200mm) Radial Flow & Mixed flow

Submersible Motor & Pumps for Deep Wells 200 mm

Construction

  • Submersible motor & pumps for deep wells of 8" (DN 200mm)
  • Sized for connection to the motor according to NEMA standards.
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Radial flow impellers. K150A,K250A,K300A,K400A,K500A.
    Mixed flow impellers. F30A,F40A,F50,F60,F70,F80,F100,F125,MB,MC,MD,ME.
  • Connection: Screwed pipe connection

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 600 meters.
  • Flow range up to 150 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 20 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • Available with Grey Iron & Stainless Steel Impeller.
Lubi pumps for deep wells of 8 DN 200mm
Sendmail
 

8"(200mm) Submersible L8 Motor

Quality for your borewell :

L8 Motors are water filled motors which can be easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
  • Water lubricated radial and axial thrust bearing.
  • Corrosion resistant AISI 304 S.S. Stator jacket.
  • Non-contaminating water filling.
  • High efficiency electrical design, lower operating cost.
  • Tropicalized design. (Lower winding temperature.)
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 58.
  • Insulation class : B.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor :
    30cm/sec. (15.0 KW - 37.0 KW).
    45cm/sec. (45.0 KW - 93.0 KW).
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour :
    20 no. (15.0 KW - 37.0 KW).
    15 no. (45.0 KW - 93.0 KW).
  • Maximum submerged depth : 350 mts.
  • Ratings : 15.0 KW - 93.0 KW .
  • Voltages : Three phase 400V +10%, -15% - 50Hz.
  • Thrust load : 32000 N (15.0 KW - 30.0 KW).
    45000 N (37.0 KW - 93.0 KW).
  • Standard motor cable : Suitable for operation in drinking water.
              1 X 10.0 mm² X 3mts.(15.0 KW)
              1 X 16.0 mm² X 3mts.(18.5 KW - 30.0 KW)
              1 X 25.0 mm² X 3mts.(37.0 KW)
              1 X 35.0 mm² X 3mts.(45.0 KW)
              2 X 25.0 mm² X 5mts.(55.0 KW)
              2 X 35.0 mm² X 5mts.(66.0 KW - 93.0 KW)
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Mechanical seal.
  • Built-in PT 100 temperature sensor.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi submersible pump operation
Sendmail
 

10" (250 mm) Mixed Flow

Submersible Motor & Pumps for Deep Wells 250 mm

Construction

  • Submersible motor & pumps for deep wells of 10" (DN 250 mm)
  • Sized for connection to the motor according to ANSI B.92.1,class 5.
  • Delivery casing with built-in non-return valve.
  • Impellers :
    Mixed flow impellers. P150A,P200A,P250A,P300A.
  • Connection : Screwed pipe connection.

    Application

  • For water supply.
  • For irrigation.
  • For civil and industrial applications.
  • For fire fighting application.

    Performance Range

  • Head range up to 517 meters.
  • Flow range up to 309 m³/h.

    Operating conditions

  • Water temperature up to 45°C.
  • Max. Sand quantity into the water : 50 g/m³.
  • Max. Starts per hour : 15 at regular intervals.
  • Direction of rotation : Clockwise as seen from the pump coupling side.

    Special Construction on request

  • Available with Grey Iron & Stainless Steel Impeller.
Lubi Pumps for Deep Wells 250 mm
Sendmail
 

10"(250mm) Submersible L8 Motor

Quality for your borewell :

L10 Motors are water filled motors which can be easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.

Product features :

  • Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
  • Water lubricated radial and axial thrust bearing.
  • Corrosion resistant AISI 304 S.S. Stator jacket.
  • on-contaminating water filling.
  • High efficiency electrical design, lower operating cost.
  • Tropicalized design. (Lower winding temperature.)
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection: IP 58.
  • Insulation class : B.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor :
    30cm/sec. (37.0 KW - 93.0 KW).
    50cm/sec. (110.0 KW - 185.0 KW).
  • Water pH : 6.5 - 8.0.
  • Maximum no. starts per hour : 15.
  • Maximum submerged depth : 350 mts.
  • Ratings : 37.0 KW - 185.0 KW.
  • Voltages : Three phase 400V +10%, - 15% - 50Hz.
  • Thrust load : 45000 N (37.0 KW - 75.0 KW).
    60000 N (93.0 KW - 185.0 KW).
  • Standard motor cable : Suitable for operation in drinking water.
              1 X 25.0 mm² X 3mts.(37.0 KW)
              1 X 35.0 mm² X 3mts.(45.0 KW)
              2 X 25.0 mm² X 3mts.(55.0 KW)
              2 X 35.0 mm² X 3mts.(66.0 KW - 93.0 KW)
              2 X 50.0 mm² X 3mts.(110.0 KW)
              2 X 70.0 mm² X 3mts.(147.0 KW -165.0 KW)
              V2 X 95.0 mm² X 3mts.(165.0 KW -185.0 KW)
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.

    On Request :

  • AISI 304 / 316 Stainless Steel Construction.
  • Mechanical seal.
  • Built-in PT 100 temperature sensor.
  • Special Voltages.
  • Double cable for Star - Delta operation.
Lubi L10 Motors
Sendmail
 

Aquapack Hydro Pneumatic Pressure System

General

LUBI AQUAPACK pressure booster system provides excellent performance for pressure boosting in bungalow schemes apartment complexes, multi storey buildings, hotels, hospitals, industries, schools etc. LUBI AQUAPACK Hydro - pneumatic systems are economical to operate and are reliable & flexible, to guarantee comfort & performance.

Features & Benefits

  • Ideal for pressure boosting without overhead tanks.
  • Constant pressure at all taps.
  • Low energy consumption.
  • Wide range.
  • Simple installation.
  • Continuous water supply due to standby pumps.
  • Low noise, tuff & reliable.
  • Fully factory assembled & tested.
  • Also available VFD controls for power saving solution.
  • Lubi Aquapack

    Brief Discription of Aquapack Components Pumps

    The pumps that are used are of international quality & are being exported worldwide by LUBI. LUBI has one of the largest range of pumps. Based on the site condition, LUBI can provide the perfect pumps to satisfy the site requirement. The pump shall be of single or multistage with dynamically balanced impellers & fitted with mechanical seal. The pump shall be furnished in close coupled construction with high efficiency & reliability.
    Lubi Brief Discription of Aquapack Components Pumps

    Control Panel Standard Features

  • Attractive control box with a dust proof & water proof IP 58 protection &    lockable key
  • Highly reliable magnetic motor starters
  • Single phase prevention & overload motor protection
  • Dry run protection and low pressure protection
  • Delay & minimum run timers to eliminate unnecessary pump cycle
  • Auto/manual operation
  • Pump on & pump fault indication
  • Automatic alternation of lead pump.This will ensure equal run time of all     pumps.
  • At the heart of the control panel is a PLC with (HMI) display to programme     the AQUAPACK hydro-pneumatic system for the site requirement.
  • Lubi Control Panel Standard Features

    Baseplate, Piping & Accessories

    The entire pressure boosting system including piping, valves & control panel are factory mounted on a single rigid baseplate. The suction & discharge manifold shall be provided of steel or galvanised pipes with flanges for easy dissambly & assembly. The system includes highly reliable isolation valves, check valves, pressure gauge & pressure switches. The entire system is factory tested for performance. Based on customer requirement the system is factory calibrated for pressure settings as per site requirement.

    Hydro - Pneumatic Tank

    Corrosion proof composite/steel construction Hydro - pneumatic tank of light weight is supplied with the system. These composite tanks are made of LLDE liner with fiber-glass wound & epoxy resin outer shell. The tank is totally rust free.

    Lubi Hydro - Pneumatic Tank

    Customer Service

    Each and every AQUAPACK system sold by LUBI has a very strong service back-up provided by LUBI or our authorised technician to ensure all systems are continuously running without any problem.

    Sendmail
     

    Centrifugal LBI Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air - conditioning and circulation plants.
    • For civil and industrial applications.
    • For Pressure boosting.
    • For fire fighting applications.
    • For Irrigation of Fields / farms.

      Performance Range

    • Head range up to 55 meters.
    • Flow range up to 1500 l/min. (90 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 - 15 %
    • Three phase : 400V +5 -15 %
    • Insulation Class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90 °.
    • Ambient temperature up to 50°.
    • Total suction lift up to 8 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Special mechanical seal.
    • higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Bracket
         Grey Iron
         Impller
         Grey Iron / Bronze
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel
         Mechanical Seal
         Graphite vs Ceramic

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LBI-101 for Grey Iron impeller, LBI-101B for Bronze impeller.


    Lubi Centrifugal LBI Pumps
    Sendmail
     

    Centrifugal LBH Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air - conditioning and circulation plants.
    • For civil and industrial applications.
    • For fire fighting applications.
    • For Irrigation of Fields / farms.

      Performance Range

    • Head range up to 84 meters.
    • Flow range up to 2500 l/min. (150 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 - 15 %
    • Three phase : 400V +5 -15 %
    • Insulation Class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90 °.
    • Ambient temperature up to 50°.
    • Total suction lift up to 8 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in mechanical seal.
    • higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Bracket
         Grey Iron
         Impller
         Grey Iron / Bronze
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LBH-18 for Grey Iron impeller, LBH-18B for Bronze impeller.


    Lubi Centrifugal LBH Pumps
    Sendmail
     

    Centrifugal LES Pumps

    Application

    • Municipal water supply, water supply for residences & high rise building.
    • Heating and air conditioning plants.
    • Water recirculating application.
    • Irrigation.

      Performance Range

    • Head range up to 93.3 meters.
    • Flow range up to 3200 l/min. (192 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Three phase : 400V +5 -15 %
    • Insulation Class F
    • Protection IP 55
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90 °.
    • Ambient temperature up to 40°.
    • Total suction lift up to 8 meters.
    • Continuous duty.
    • Max. Operating pressure 10 bar.

      Model Designation

    • LES - Grey Iron impeller.
    • LESB - Bronze impeller.

      Construction and Safety Standards

    • EN. 60034 - 1
    • IEC34 - 1
    • CEI 2 - 3

      Special Features on Request

    • AISI 410 Stainless steel motor shaft.
    • Other voltages.
    • Available with gland packing.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Impller
         Grey Iron / Bronze
         Motor Adaptor
         Grey Iron
         Stator Frame
         Alluminium
         Shaft
         Carbon Steel
         Shaft Sleeve
         Stainless Steel
         Mechanical Seal
         Carbon v/s Ceramic

    Lubi Centrifugal LES Pumps
    Sendmail
     

    Drainage Pumps LAP

    Application

    • Waste water.Sump drainage.
    • Flood control.
    • Dewatering for fish pond or basement.

      Performance Range

    • Head range up to 20 meters.
    • Flow range up to 900 l/min. (54 m³/h).

      Features

    • New design for light weight, elegant shape with best quality.
    • Unfastening the bolts between the oil casing and the upper
      pump casing allows the body to be separated for easy maintenance.
    • The smallest pump in the range is the LAP 2015 / 2035, which is an
      extremely practical pump, has a low temperature oil filled motor
      and single seal design.
    • Pump for 2HP or higher are furnished with dual Mechanical seal.
      Silicon carbide at the water end and carbon ceramic at     
      the motor end.

      Thermal overload protector

    • Equipped with Automatic reset motor protector, prevents motor from
      burning due to high temperature/phase failure/ voltage
      drop and lock impeller.
      Lubi Cable base

      Cable base

    • Epoxy resin seal cable base to prevent water intrusion into motor
      through the cable wire.
      Lubi U Type Impeller

      U Type Impeller

    • This impeller can generate rapid rotating vortex to handle fluid
      mixed with long fiber, the majority of abrasive solids do     
      not touch impeller to minimize impeller wear.
      Lubi Float Switch

      Float Switch

    • SExcellent quality float switch Provided with epoxy resin sealed
      connector.
      Lubi Float Switch Pump

      Float Switch Pump

    • The pumps are equipped with wide angle on/off level control
      float switch for easy and simple automatic operation.
    • Applications : Slushy water, construction site, Dewatering,
      Drainage application.
    • Type : ½ ~ 1 HP Single-phase pumps.
      Lubi Drainage Pumps

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM).
    • Single phase :230V +5 - 15 %
    • Three phase :400V +5 -15 %
    • Protection IP 68
    • Insulation class : B

      Operating Conditions

    • Liquid temperature up to 40°.
    • Ambient temperature up to 50°.
    • Max.Starts per hour : 30 at regular intervals.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.
    Lubi Drainage Pumps LAP
    Sendmail
     

    End Suction Pump

     
     
    Lubi End Suction Pumps

    LUBI Standardized Process pumps are constructed to conform with the world
    wide accepted ISO 2858 (DIN 24256) / DIN 24255 standard, which sets out
    an agreed hydraulic grid for pump performance and at the same time,
    ensures this performance is achieved within a precise dimensional standard.

    Advantages

    To the end user, the advantages to be gained by specifying pumps constructed to the ISO 2858 standard are considerable and include the following:

    - Simplification of design and tender procedures.
    - Savings in time and cost due to standardization of pipework layouts.
    - Reduction in spares requirements due to interchangeable components.
    - Replacement pumps are available from a wide variety of sources, ensuring the user the best possible afrter sales
      service.


    BACK-PULL-OUT PUMP WITH SPACER TYPE COUPLING FACILITATE MAINTENANCE WITHOUT DISTURBING THE SUCTION AND DISCHARGE PIPING

    Application

    LUBI Standardized Process pumps series is suitable for handling majority of organic and inorganic liquids which can be chemically aggressive or neutral, for a wide range of temperature and pressure in the following industries :

    - Refineries, Petrochemical and Fertilizer Plants.
    - Processing Plants like Sugar, Food, Paper, Pulp and Sewage treatment.
    - Municipal Water Supply, Irrigation Schemes and Desalination Plant.
    - Thermal Power Plants.
    - Heating and Airconditioning Plants

    Main Features

    - Volute casing with end suction and top center line delivery branch with integerally cast feet offer a strong and rugged
      constrution.
    - Impellers have been developed with computer aided design techniaque for high efficiency and better suction lifts. They   are double shrouded and hydraulically balanced with back balancing vanes on the smaller sizes, and back balancing   replaceable wear rings on the larger sizes.
    - Back pull out facility permits removal of driving head with impeller assembly without disturbance of suction and   delivery pipework.Drive motor can also remain in place if spacer coupling is used.
    - Shaft is supported in oil lubricated ball bearings. Sealed grease lubricated bearings are available on request.
    - The standardization and rationalization of the design permits high interchangeability of components. All the 29 models   are assembled using 4 bearing frames, shafts, ball bearings and shaft seals. This feature simplies spare parts stocking   and servicing with reduced cost of operation and overhauling.
    - Shaft sealing executions can be with gland packings or single/double mechanical seals to suit the liquid pumped.
    - As pump dimensions are standardized, installation time and cost are minimum.
    - To prolong the life of the pump replaceable wear rings are fitted to volute casings.
    - For high temperature applications stuffing box cooling arrangement can be provided.
    - Flanges can be provided to DIN / BS / ANSI /ISI standard as required by the user.

    Operating Specifications

    - Nozzle Diameters : 32mm to 200mm
    - Flow Range : upto 750 m qube / hr ( 12500 LPM or 3300 USGPM or 2750 IGPM )
    - Head Range : upto 160 metres ( 525 feet )
    - Operating Speed : 1450, 2900 & 960 RPM ( available for 60 Hz also)
    - Operating Pressure : upto 16 bars.
    - Operating Temperature : -30 to +300 degrees centigrade ( -22 to + 572 degrees farenheit )

    Sendmail
     

    Horizontal Submersible LHL Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • Canals / River belt irrigation.
    • For water supply.
    • Fountains.
    • For fire fighting applications.
    • For civil and industrial applications.
    • For heating, cooling, air - conditioning and circulation plants.

      Performance Range

    • Head range up to 42 meters.
    • Flow range up to 950 l/min. (57 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 - 15 %
    • Three phase : 400V +5 -15 %
    • Protection IP 68

      Operating conditions

    • Liquid temperature up to 35°.
    • Ambient temperature up to 50°.
    • Minimum submergence depth 0.5 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Impller
         Grey Iron / Bronze
         Adaptor
         Grey Iron
         Lower Bearing Housing
         Grey Iron
         Stator Frame
         Stainless Steel
         Shaft
         Stainless Steel

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LHL-150 for Grey Iron impeller, LHL-150B for Bronze impeller.

    Lubi Horizontal Submersible LHL Pumps
    Sendmail
     

    Grinder Pumps LGP

    Application

    • Used in pressure sewage system.
    • Drainage of waste water from individual residences,
      apartment, buildings,recreational developments,
      motels.
    • Transferring waste water of commercial buildings,
      industrial plants, waste water sampling, small
      hospitals.
    • Schools, federal, state and local parks’ waste
      water drainage.
    • To transfer various waste water and sewage.

      Performance Range

    • Head range up to 30 meters.
    • Flow range up to 315 l/min. (19 m³/h).

      Features

    • Durable heavy duty finned cast iron construction.
    • Grinder is complete unit, light weight, compact, and
      portable, easy to be installed.
    • Double protection at connection box: barrier grommet,
      barrier epoxy, prevent water ingress to the motor area,     
      assuring a longterm reliable operation.
    • Additionally, epoxy encapsulation and stripped leads
      positively eliminate wicking from the cable. Two balls bearing     
      construction support shaft and rotor.
    • Dry type motor with high efficiency and low current.
      Equipped with auto reset motor protector, prevent the motor     
      damage from abnormal heat and current.
    • The dual silicon carbide mechanical seal system, extra
      oil seal protection, and WD water detector protects the motor     
      from sewage contamination, to provide you exceptionally
      long pump service life.
    • An excellent vortex impeller and casing water cavity housing design.
      Provide high efficiency and power saving, handling ground slurry
      and sewage without clogging or binding.
    • Radial cutter and cutter ring: corrosion resistant material,
      hardened to 55 - 60 Rockwell C.

      Cutting Ability Demonstration

    • Specialized one single strong shaft with impeller and radial cutter,
      dramatically reduces the torque requirement on the motor,
      cuts with less horsepower, and increases the pump’s efficiency.
      What’s more, it prevents clogging with some troublesome
      objects such as sanitary napkins, plastic, rubber, disposable
      diapers and cloth items. The design of Lubi grinder prevents
      clogging, binding and roping. They chop up almost anything and
      everything in order for you to get a continuous, long - term
      pumping service.

      Spefification

      Sewage pumps
    Lubi Grinder Pumps LGP
    Sendmail
     

    Horizontal Submersible LHL Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • Canals / River belt irrigation.
    • For water supply.
    • Fountains.
    • For fire fighting applications.
    • For civil and industrial applications.
    • For heating, cooling, air - conditioning and circulation plants.

      Performance Range

    • Head range up to 55 meters.
    • Flow range up to 1500 l/min. (90 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Three phase : 400V +5 -15 %
    • Protection IP 68

      Operating conditions

    • Liquid temperature up to 35°.
    • Ambient temperature up to 50°.
    • Minimum submergence depth 0.5 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Impller
         Grey Iron / Bronze
         Adaptor
         Grey Iron
         Lower Bearing Housing
         Grey Iron
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel
         Thrust Bearing
         Fibre / Bronze

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LHL-1 for Grey Iron impeller, LHL-1B for Bronze impeller.

    Lubi Horizontal Submersible LHL Pumps
    Sendmail
     

    Horizontal Submersible LHS Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • Canals / River belt irrigation.
    • For water supply.
    • Fountains.
    • For fire fighting applications.
    • For civil and industrial applications.
    • For heating, cooling, air - conditioning and circulation plants.

      Performance Range

    • Head range up to 76 meters.
    • Flow range up to 3200 l/min. (192 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Three phase : 400V +5 -15 %
    • Protection IP 68

      Operating conditions

    • Liquid temperature up to 35°.
    • Ambient temperature up to 50°.
    • Minimum submergence depth 0.5 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Impller
         Grey Iron / Bronze
         Adaptor
         Grey Iron
         Lower Bearing Housing
         Grey Iron
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel
         Diaphragm
         Rubber

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LHS-27 for Grey Iron impeller, LHS-27B for Bronze impeller.

    Lubi Horizontal Submersible LHS Pumps
    Sendmail
     

    Pressubre Booster Systems

    Lubi Hydro Series Pumps can provide peak pressure
    to every bathroom or water fixture in your home and
    garden at the same time. Enjoy pressurized water at
    each tap in your home regardless of its location in the house.

    When you are in the shower you don’t like a dribble of water.
    Lubi Hydro Series Pumps can provi- -de pressurized water in
    each shower of the home. It will also not affect the pressure
    if another shower, tap or washing machine is turned on.

    Reliable, Long Lasting Lubi Hydro Series Pumps are built to
    the highest engineering standards to work automatically under
    the most demanding conditions. Hydro - pneumatic tank used in
    the system have a two part polyurethene paint finish on the out
    side and a polyurethene liner in the water chamber to provide
    corrosion resistance. The diaphragm in the tank is made of a
    high grade butyl rubber. The system connections are of
    stainless steel.

    A Lubi Hydro Series Pumps is easy to Install and Operate.
    Just connect the suction to your home water tank and discharge
    to the pipe going to the home water line. Give electrical conne
    - -ction and switch on.

    Lubi Pressubre Booster Systems
    Sendmail
     

    Centrifugal MCS Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For fire fighting applications.
    • For irrigation.

      Performance Range

    • Head range up to 46 meters.
    • Flow range up to 960 l/min. (57.6 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 7 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Available grey iron or brass impeller.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MCS
      B - MCS
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Centrifugal MCS Pumps
    Sendmail
     

    Centrifugal Monoblock MDH Pumps

    "LUBI" brand single phase Monoblock pumpsets are manufactured in reference to IS : 9079 and motoro with reference IS : 996 & IEC 34 - 1. Special care and quality conterol measures are adopted to give efficient and reliable operation for years. special features are outlined below.

    Application

    • Residential Bunglows.
    • Community Water Supply.
    • Construction Sites.
    • Apartments.
    • Samll Farms.
    • Lawns & Gardens.
    • Car Washing.
    • Sprinklers
    • Hotels & Hospitals

      Salient Features

    • The laminations are non - oriented silicon steel & confirms to IS - 648.
    • Volute, Impeller, Adaptor, Stator body, Endshield is made of close grained cast iron of high tensile strength and has a     very smooth surface finish resultig in low friction losses.
    • Motor windings are vaccum imperegnated with synthetic vernish for better monisture resistance.
    • Superior mechanical shaft seal for longer life and effective sealing against water leakage.
    • The electric rotor is pressure die cast & uses electric wrade aluminium.
    • Grease Labricated anti - friction ball bearings are fitted at both ends to withstand radial and axial loads.
    • Better insulating materials are used so that pumpset can with stand high temperature rise.
    • All components are manufactured from materials as per standard specifications.
    • They are precisely machined on modern machins tools to give you years of reliable operation.

      Standard Motor

    • The motor is totally enclosed and fan cooled (TEFC).
    • Motor with specification of IS : 996 & IEC : 34 - 1.
    • Class 'B' insulation is used.
    • The stainless steel shaft is ground finished.
    • The motor are of the capacitor Start & Run (CS & R) desing giveing high starting torque.
    • 2 - Pole induction motor.
    • Input supply condition is single phase - 230V, Three Phase 415 (50Hz).
    • Voltage Range 170V - 240V (Single Phase), 300V - 415V (Three Phase).
    Lubi Centrifugal Monoblock MDH Pumps
    Sendmail
     

    Self - Priming LBM Mud Pumps

    Application

    • Marine - Pumping water from docks, Ports, vessels.
    • Industrial - Pumping petroleum products, Chemical effluents, Sewage, ash-water etc.
    • Civil construction - Dewatering foundations, trenches and pits.
    • Mobile Machinery - Cooling water for marine engines and shovels.
    • Public utilities - Sewage pumping.

      Performance Range

    • Head range up to 25 meters.
    • Flow range up to 900 l/min. (54 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • 4 - pole submersible motor 50Hz (n = 1440 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Three phase : 400V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 8 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      NOTE : For Stainless Steel impeller please add a subscript “S” to model no.
      For Ex. : LBM-310 for Grey Iron impeller, LBM-310S for Stainless Steel impeller.

      Material

      COMPONENTS
      MATERIAL
         Pump Casing
         Grey Iron
         Impller
         Grey Iron / Stainless Steel
         Adaptor
         Grey Iron
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel
    Lubi Self - Priming LBM Mud Pumps
    Sendmail
     

    Multi - Stage Centrifugal MFHC Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • As pressure boosting pumps for central water systems.
    • For civil and industrial applications.
    • For watering gardens.
    • For irrigation.

      Performance Range

    • Head range up to 67 meters.
    • Flow range up to 175 l/min. (10.5 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MFHC
      B - MFHC
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G - Cu Sn 10 UNI 7013
         Impller
         Noryl
         Noryl
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Multi - Stage Centrifugal MFHC Pumps
    Sendmail
     

    Peripheral Non Self-Priming MI NSP Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For watering gardens.

      Performance Range

    • Head range up to 31 meters.
    • Flow range up to 30 l/min. (1.8 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.
    • This pump is supplied with a check valve on the suction side, so no foot valve is required.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MI
      B - MI
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Peripheral Non Self-Priming MI NSP Pumps
    Sendmail
     

    Peripheral Self-Priming MI SP Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For watering gardens.

      Performance Range

    • Head range up to 47 meters.
    • Flow range up to 45 l/min. (2.7 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.
    • This pump is supplied with a check valve on the suction side, so no foot valve is required.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MI
      B - MI
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic

    Lubi Peripheral Self-Priming MI SP Pumps
    Sendmail
     

    Pressure Booster MH Series Pumps

    Lubi MH series, Non Self Priming, Multi Stage, Horizontal
    Centrifugal Pumps is a compact Pumpset.
    The pump has stylish but maintenance free features
    like – power coated motor and pump casing for
    anti-corrosion. All wet moving parts are made from
    stainless steel for long life and better efficiency.
    Strong mechanical seal for leak free operations.

    Application

    • Domestic Water supply.
    • Pressure booster system.
    • Air Conditioning and Cooling system.
    • High Pressure Liquid Circulation and pumping in Industries.
    • Gardening and Agriculture.

      Performance Range

    • Head range up to 76 meters.
    • Flow range up to 3200 l/min. (192 m³/h).

      Motor

    • Totally enclosed Fan cooled (TEFC) Squirrel cage motor.
    • 2 Pole, 2900 RPM, 50Hz (Also available in 115 / 230V
      60Hz 3500 RPM)
    • Protection : IP 44
    • Insulation : Class F
    • tandard voltage : 1 x 230V, 3 x 415V
    • Thermal Overload Protection (TOP) for single phase motors.
    • 3Ph motors should be connected to motor starter as per local regulations.

      Operating conditions

    • Liquid : Clear, Non Abrasive, Non Explosive
    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.

      Special Features on Request

    • CE Certified pump on Request.
    • Available in MHN type ( With Stainless Steel Suction & delivery Casing).
    • Special mechanical Seals on request.
    • Higher liquid and ambient temperatures on request.

      Pressure Booster MH Series Pumps

    Lubi Pressure Booster MH Series Pumps
    Sendmail
     

    Self - Priming MCJ Jet Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • As pressure boosting pumps for central water systems.
    • For circulation plants.
    • For watering gardens.
    • For washing with a jet of water.

      Performance Range

    • Head range up to 61 meters.
    • Flow range up to 158 l/min. (9.5 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MCJ
      B - MCJ
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Self - Priming MCJ Jet Pumps
    Sendmail
     

    Self - Priming Liquid Ring MPR Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For watering gardens.

      Performance Range

    • Head range up to 60 meters.
    • Flow range up to 40 l/min. (2.4 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MPR
      B - MPR
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Self - Priming Liquid Ring MPR Pumps
    Sendmail
     

    Sewage Pumps LFP

    Application

    • Drainage of sewage from the building basements, hotel industry, waste water from factories.
    • Drainage of sewage from industrial process factories.
    • Emptying fo septic tanks, cesspits and sewage pump stations.
    • Pumping surface and drainage water from garages and sprinkler systems.

      Performance Range

    • Head range up to 18.5 meters.
    • Flow range up to 1000 l/min. (60 m³/h).

      Features

    • A precision manufactured motor is achieved utilizing
      a laminated sheet steel production process combined with the     
      highest standard of quality control. The drive shaft and rotor
      assembly is heat - treated and the stator and wiring     
      impregnated with varnish and then heat dried in an industrial oven.
      This ensures a 100% quality manufactured motor     
      with stable characteristics and a high efficiency.

    • Standard accessories include: VCT cable with an epoxy resin
      sealed water - resistant cable base, AC thermal motor     
      protector, dual mechanical seal and lip seal design.

      Thermal overload protector

    • Equipped with Automatic reset motor protector, prevents motor from
      burning due to high temperature/phase failure/ voltage
      drop and lock impeller.
      Lubi Sewage Pumps

      Cable base

    • Epoxy resin seal cable base to prevent water intrusion into motor
      through the cable wire.
      Lubi Sewage Pumps

      P Type Impeller

    • Semi-open impeller cutting foreign particles, and preventing clog
      by solid media.
      Lubi Sewage Pumps

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Spefification

      Sewage pumps
    Lubi Sewage Pumps LFP
    Sendmail
     

    Heavy Duty Sewage Pumps LHP

    Application

    • Drainage of waste water from the liberation tank, purifying
      tank and sewage tank in water treatment plant.
    • Drainage of waste water and inclusion containing fibrous
      admixtures from
      leather factory, dyeing factory and food processing factory.
    • Sewage management, accumulated water, septic tank,
      stock farm.
    • Pumping sewage from single and multi family dwellings.
    • Pumping sewage from hotels, restaurants, schools and
      public buildings.

      Performance Range

    • Head range up to 38 meters.
    • Flow range up to 24,000 l/min. (1440 m³/h).

      Features

    • International standard design : VCT cable, thermal overload
      protector, silicon carbide mechanical seal,
      high grade cast iron, good quality and performance.
    • P / E Multiple impeller designs to handle solids laden sewage and/or
      fibrous substance.
    • For Extra protection, an oil seal ring has been installed under the oil
      chamber. This lip seal helps prevent the ingress of silt and sand
      into the lower seal chamber.

      Thermal overload protector

    • Equipped with Automatic reset motor protector, prevents motor from
      burning due to high temperature/phase failure/ voltage
      drop and lock impeller.
      Lubi Sewage Pumps

      Cable base

    • Epoxy resin seal cable base to prevent water intrusion into
      motor through the cable wire.
      Lubi Sewage Pumps

      P Type Impeller

    • Semi-open impeller embedded with a tun-gsten carbide blade to
      enable cutting of fibrous materials to prevent clogging. (LHP - 4535)
      Lubi Sewage Pumps

      E Type Impeller

    • Single channel non-clog impeller, allows large solids passage
      preventing clogging and allowing effective drainage/dewatering
      for higher head applications with solids laden media.
      ( LHP 4735 & LHP 41035.)
      Lubi Sewage Pumps

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Spefification

      Sewage pumps
    Lubi Heavy Duty Sewage Pumps LHP
    Sendmail
     

    Self - Priming MCJ Jet Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • As pressure boosting pumps for central water systems.
    • For circulation plants.
    • For watering gardens.
    • For washing with a jet of water. Lubi Self - Priming MCJ Jet Pumps

      Performance Range

    • Head range up to 61 meters.
    • Flow range up to 158 l/min. (9.5 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MCJ
      B - MCJ
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
     
    Sendmail
     

    Side Suction Peripheral MPS Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For watering gardens.

      Performance Range

    • Head range up to 40 meters.
    • Flow range up to 45 l/min. (2.7 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 9 m.
    • Continuous duty.
    • This pump is supplied with a check valve on the suction side, so no foot valve is required.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MI
      B - MI
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Bronze G CuSn10UNI 7013
         Impller
         Brass
         Brass
         Shaft
         Cr Ni Steel AISI 410
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
         Graphite vs Ceramic
    Lubi Side Suction Peripheral MPS Pumps
    Sendmail
     

    CSP Series Small Submersible Drainage Pumps / Sump Pumps

    Features

  • Rugged cast iron pump housing, impeller, and motor casing with powder coating for     corrosion and rust prevention.
  • 230V thermally protected energy efficient motor.
  • Permanently lubricated motor ball bearings.
  • Extra long 15 Feet grounded power cord.
  • 1-1/2” BSP Discharge pipe size.
  • Suitable for clear water only.

    Motor Specifications

  • 230V, 50Hz.
  • 1Phase.
  • 2850 RPM
  • Oil Filled : Thermally Protected Small Submersible Drainage Pumps / Sump Pumps

    Minimum sump pit diameter

    Small Submersible Drainage Pumps / Sump Pumps
  • Lubi CSP Series Small Submersible Drainage Pumps / Sump Pumps
    Sendmail
     

    CSP Series Small Submersible Drainage Pumps / Sump Pumps

    Features

    • Rugged cast iron pump housing, impeller, and motor casing with
      powder Rugged, grey iron pump housing, impeller and     
      motor casing with epoxy powder coating for corrosion resistance.
    • Permanently lubricated motor ball bearings.
    • Oil filled hermetically sealed motor with thermal overload protection.
    • Extra long 13 Feet grounded power cord.
    • Stainless steel shaft.
    • Stainless steel fasteners.

      Motor Specifications

    • 115V, 60Hz.
    • 1Phase.
    • 3450 RPM
    • Oil Filled : Thermally Protected

      Model Designation

      Small Submersible Drainage Pumps / Sump Pumps

      Factory switch settings

      Small Submersible Drainage Pumps / Sump Pumps

      Minimum sump pit diameter

      Small Submersible Drainage Pumps / Sump Pumps
    Lubi CSP Series Small Submersible Drainage Pumps / Sump Pumps
    Sendmail
     

    MSP Series Small Submersible Drainage Pumps / Sump Pumps

    Features

    • Corrosion resistant composite construction.
    • Thermal Overload protection.
    • Permanently lubricated motor ball bearings.
    • Extra long 15 Feet grounded power cord.
    • 1-1/2” Discharge pipe size.
    • Stainless steel shaft.
    • Stainless steel fasteners.

      Motor Specifications

    • 230V, 50Hz.
    • 1Phase.
    • 3000 RPM (syn.)
    • Oil Filled : Thermally Protected

      Model Designation

      Small Submersible Drainage Pumps / Sump Pumps

      Factory switch settings

      Small Submersible Drainage Pumps / Sump Pumps

      Minimum sump pit diameter

      Small Submersible Drainage Pumps / Sump Pumps
    Lubi MSP Series Small Submersible Drainage Pumps / Sump Pumps
    Sendmail
     

    MSP Series Small Submersible Drainage Pumps / Sump Pumps

    Features

    • Corrosion resistant composite construction.
    • Thermal Overload protection.
    • Permanently lubricated motor ball bearings.
    • Extra long 13 Feet grounded power cord.
    • 1-1/2” Discharge pipe size.
    • Stainless steel shaft.
    • Stainless steel fasteners.

      Motor Specifications

    • 115V, 60Hz.
    • 1Phase.
    • 3450 RPM
    • Oil Filled : Thermally Protected

      Model Designation

      Small Submersible Drainage Pumps / Sump Pumps

      Factory switch settings

      Small Submersible Drainage Pumps / Sump Pumps

      Minimum sump pit diameter

      Small Submersible Drainage Pumps / Sump Pumps
    Lubi MSP Series Small Submersible Drainage Pumps / Sump Pumps
    Sendmail
     

    Two - Stage Centrifugal MCT Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • For water supply.
    • For heating, cooling, air-conditioning and circulation plants.
    • For civil and industrial applications.
    • For pressure boosting.
    • For fire fighting applications.
    • For irrigation.

      Performance Range

    • Head range up to 58 meters.
    • Flow range up to 90 l/min. (5.4 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Single phase : 230V +5 -15 % with thremal protection.
    • Insulation class F
    • Protection IP 44
    • Constructed in accordance with IEC 34.

      Operating conditions

    • Liquid temperature up to 90°C.
    • Ambient temperature up to 50°C.
    • Maximum suction lift up to 7 m.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in three phase.
    • Available grey iron or brass impeller.
    • Special mechanical seal.
    • Higher liquid or ambient temperatures.
    • Available in 60Hz.

      Material

      COMPONENTS
      MCS
         Pump Casing & Bracket
         Grey Iron 200 ISO 185
         Impller
         Noryl
         Shaft
         Cr Ni Steel AISI 410
         Mechanical Seal
         Graphite vs Ceramic
    Lubi Two-Stage Centrifugal MCT Pumps
    Sendmail
     

    Vertical Submersible LVS Pumps

    Application

    • For clean liquids without abrasives, which are non - aggressive for the pump materials.
      (Solids content up to 0.2 %)
    • Canals / River belt irrigation.
    • For water supply.
    • Fountains.
    • For fire fighting applications.
    • For civil and industrial applications.
    • For heating, cooling, air - conditioning and circulation plants.

      Performance Range

    • Head range up to 110 meters.
    • Flow range up to 1000 l/min. (60 m³/h).

      Motor

    • 2 - pole submersible motor 50Hz (n = 2900 RPM)
    • Three phase : 400V +5 -15 %
    • Protection IP 68

      Operating conditions

    • Liquid temperature up to 35°.
    • Ambient temperature up to 50°.
    • Minimum submergence depth 0.5 meters.
    • Continuous duty.

      Special Features on Request

    • Other voltages.
    • Available in 60Hz.

      Material

      COMPONENTS
      MATERIAL
         Bowl
         Grey Iron
         Impller
         Grey Iron / Bronze
         Adaptor
         Grey Iron
         Lower Bearing Housing
         Grey Iron
         Motor Base
         Grey Iron
         Stator Frame
         Grey Iron
         Shaft
         Carbon Steel
         Thrust Bearing
         Carbon / S.S.
         Diaphragm
         Rubber

      NOTE : For Bronze impeller please add a subscript “B” to model no.
      For Ex. : LVS-1 for Grey Iron impeller, LVS-1B for Bronze impeller.

    Lubi Vertical Submersible LVS Pumps
     
    links
     
    Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.