Kiwi Pumps India - Submersible Pumps and Submersible Motors, Manufacturers Exporters and Suppliers

Submersible Pumps and Motors

Kiwi Pumps

Kiwi pumps is India’s largest manufacturer & exporter of 3” submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of 3” borehole submersible pumps that suit various kinds of user requirements.

Borehole submersible pumps for wells from 3 to 10 inches wells, with 2-pole electric motors. The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. In all domestic, industrial and agricultural applications, where it is required to life water out from below the ground and to push it above with pressure.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi’s V3 borehole submersible pumps are the most economical energy-efficient pumps for 3 inch dia wells or larger. Delivering the optimum amount of water and pressure for general home and farm use. V3 borehole submersible pumps are available in different sizes such as 0.5 HP to 1.5 HP with flows upto 60 LPM. V3 submersible pumps are ideal for low yielding bores or where 4” borehole submersible pumps cannot fit; such as old windmill, handmade bores etc.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Design - V3 Submersible Pumps

Single or multistage centrifugal pumps in pump shroud or in ring section design. Radial hydraulic systems; Suction casing fitted between motor and pump. A suction casing is fitted between the pump & motor. Suction casing is fitted with strainer to protect the pump from coarse particles / sand in the fluid. Pumps with check valve (non-return valve) in option are supplied. Available with threaded particularly suitable for vertical installation in narrow deep wells. Additional bearings are fitted depending on the number of stages. Stainless Steel inserts are fitted to the impeller. The impeller hub is protected by stainless Steel inserts are fitted depending on the number of stages. Stainless steel inserts are fitted to the impeller. The impeller hub is protected by stainless steel inserts. This design improves the starting torque & has the effect that solid particles such as sand are propelled outside.

Salient Features Of V3 Submersible Pumps

	Premier manufacturing technology. The innovative mechanical design, combined with the use of an advanced manufacturing technology, results in a state-of-the-art 3-inch submersible pump line.

	Proven & Reliable Design For Critical Conditions.

	Manufactured from quality corrosion resistant materials. V-3-7 series use to handle low yielding bores and sandy well conditions.

	State of the art design: Delivers optimum performance and reliability in the toughest conditions.

	25, 35, 45 & 55 LPM models feature independent centrifugal impellers to provide smooth starting and long life.

	Thick (2.0MM) stainless steel outer casing shell to protect and align internal submersible pumps components. Rigid connection between motor and pump provides a single, perfectly aligned unit.

	Rubber & bronze bearing provide low friction and high wear resistance.

	Easy assembling, dismantling. Easily serviceable pump & field rewindable motors. Suction screen and coupling are made of stainless steel.

	Standard 2 pole speed motor (2900 RPM).

	Once assembled, each 3” borehole submersible pump is individually tested to assure performance within design specifications.

	Kiwi Pumps uses non-contaminating, water filled motor design.

	High pumping efficiency for reduced running costs.

	Cost effective pumping systems: The hydraulic design is such as to enhance the efficiency, thus reducing energy consumption and making pumping systems more cost effective.

	Light weight and compact.

	Lip seal and sand guard to prevent ingress of impurities into the motor.

	Maintenance and service: with time some parts subject to wear may need replacement.

	The simplicity of the assembly concept allows for easy field service without the need of special tools minimizing the system down-time.

	The MOTOR is of non-toxic cooling bath type; asynchronous with squirrel cage rotor. Suction and delivery casing are in cast iron and if required in stainless steel & brass. Impellers and diffusers are in Noryl homologated for drinkable water use and are equipped with stainless steel inserts in correspondence of the wearable zones.

	Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.

	Suction Adapter: Designed to ensure proper pump/ motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.

	Pump Shaft: High tensile type 410 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.

	Powered for continuous operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

	Bearings with sand channels; all bearings are water lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.

	The motor adapter, coupling, check value and discharge head may be removed without disassembling the hydraulic stack.

Application Of V3 Submersible Pumps

	A combination of multistage centrifugal pumps and submersible motors, the 3” borehole submersible pump, is designed for applications like:

	Domestic water supply.

	Water supply to high rise buildings.

	Housing complexes, bungalows.

	Gardens, farms and nurseries.

Operating Parameters

Name of Parts	V3 Borehole Submersible Pumps
H. P. Range	0.5 H.P. To 1.5 H.P.
Head Range	Upto 120 Meters
Discharge At Duty Point	25 - 55 LPM.
Max. Discharge	80 LPM.
Max. Head / Stage	3 Meters
Operating Voltage	180-240 Volt (1 Phase)
Max voltage fluctuation	+15% -20%; -Max
Max. Start/Hour	20
Max. Temp. of Liquid	40° C
Max. Permissible Amount of Sand In The Water	20 Gram/Cubic Meter
Version	Single Phase - 220 Volt - 50 Hz

Send Mail

Kiwi pumps is India’s largest manufacturer & exporter of 4” submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of 3” borehole submersible pumps that suit various kinds of user requirements.

Kiwi's Borehole submersible pumps suitable for 4" or larger boreholes. Manufactured from corrosion & abrasion resistant materials. Close coupled to a submersible electric motor. Designed for flow rate upto 300 LPM and head upto 220 meter.

Borehole submersible pumps for wells from 3 to 10- inch wells, with 2-pole electric motors. The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. In all domestic, industrial and agricultural applications, where it is required to life water out from below the ground and to push it above with pressure.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Design - V4 Submersible Pumps

Single or multistage centrifugal pumps in pump shroud or in ring section design. Radial or mixed flow hydraulic systems; Suction casing fitted between motor and pump. A suction casing is fitted between the pump & motor. Suction casing is fitted with strainer to protect the pump from coarse particles / sand in the fluid. Pumps with check valve (non-return valve) in option are supplied. Available with threaded particularly suitable for vertical installation in narrow deep wells. Additional bearings are fitted depending on the number of stages. Stainless Steel inserts are fitted to the impeller. The impeller hub is protected by stainless Steel inserts are fitted depending on the number of stages. Stainless steel inserts are fitted to the impeller. The impeller hub is protected by stainless steel inserts. This design improves the starting torque & has the effect that solid particles such as sand are propelled outside.

Salient Features Of V4 Submersible Pumps

	Premier manufacturing technology. The innovative mechanical design, combined with the use of an advanced manufacturing technology, results in a state-of-the-art 3-inch submersible pump line.

	Proven & Reliable Design For Critical Conditions.

	State of the art design: Delivers optimum performance and reliability in the toughest conditions.

	25, 40, 50,100,150,165,170 & 200 LPM models feature independent centrifugal impellers to provide smooth starting and long life.

	Thick (2.0MM) stainless steel outer casing shell to protect and align internal submersible pumps components. Rigid connection between motor and pump provides a single, perfectly aligned unit.

	Rubber & bronze bearing provide low friction and high wear resistance.

	Easy assembling, dismantling. Easily serviceable pump & field rewindable motors. Suction screen and coupling are made of stainless steel.

	Standard 2 pole speed motor (2900 RPM).

	Once assembled, each 4” borehole submersible pump is individually tested to assure performance within design specifications.

	Kiwi Pumps uses non-contaminating, water filled motor design.

	High pumping efficiency for reduced running costs.

	Cost effective pumping systems: The hydraulic design is such as to enhance the efficiency, thus reducing energy consumption and making pumping systems more cost effective.

	Light weight and compact.

	Lip seal and sand guard to prevent ingress of impurities into the motor.

	Maintenance and service: with time some parts subject to wear may need replacement.

	The simplicity of the assembly concept allows for easy field service without the need of special tools minimizing the system down-time.

	The MOTOR is of non-toxic cooling bath type; asynchronous with squirrel cage rotor. Suction and delivery casing are in cast iron and if required in stainless steel & brass. Impellers and diffusers are in Noryl homologated for drinkable water use and are equipped with stainless steel inserts in correspondence of the wearable zones.

	Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.

	Suction Adapter: Designed to ensure proper pump/ motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.

	Pump Shaft: High tensile type 410 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.

	Powered for continuous operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

	Bearings with sand channels; all bearings are water lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.

	The motor adapter, coupling, check value and discharge head may be removed without disassembling the hydraulic stack.

Application Of V4 Submersible Pumps

	A combination of multistage centrifugal pumps and submersible motors, the 3” borehole submersible pump, is designed for applications like:

	Domestic water supply.

	Water supply to high rise buildings.

	Housing complexes, bungalows.

	Gardens, farms and nurseries.

Operating Parameters

Name of Parts	V4 Borehole Submersible Pumps
H. P. Range	0.5 H.P. To 3.0 H.P. (Single phase version) 1.0 H.P. TO 6.0 H.P. (Three Phase version)
Head Range	Upto 120 Meters
Discharge At Duty Point	25 - 200 LPM.
Max. Discharge	300 LPM.
Max. Head / Stage	7 Meters
Operating Voltage	160-240 volt (Single Phase) 300-440 volt (Three phase)
Max voltage fluctuation	+15% -20%
Max. Start/Hour	20
Max. Temp. of Liquid	40° C
Max. Permissible Amount of Sand In The Water	30 Gram/Cubic Meter
Version	Single Phase - 220 Volt - 50 Hz Three Phase - 415 volt 50Hz

Send Mail

Kiwi pumps is India’s largest manufacturer & exporter of 6” submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of 6” borehole submersible pumps that suit various kinds of user requirements.

Kiwi's 6" Borehole submersible pumps suitable for 6" or larger boreholes. Superior hydraulic design of impeller and diffuser make these pumps are most efficient. Utilization of top class material allow pumps to be reliable, long lasting and increases ites wear resistance towards sand. State of the art manufacturing process ensures optimum and consistent quality of these pump. Manufactured from corrosion & abrasion resistant materials. Close coupled to a submersible electric motor. Designed for flow rate upto 1400 LPM and head upto 430 meter.

Borehole submersible pumps for wells from 3 to 10- inch wells, with 2-pole electric motors. The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. In all domestic, industrial and agricultural applications, where it is required to life water out from below the ground and to push it above with pressure.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Design - V6 Submersible Pumps

Single or multistage centrifugal pumps in pump shroud or in ring section design. Radial or mixed flow hydraulic systems; Suction casing fitted between motor and pump. The stage casing of radial pumps are connected by metal straps, those of mixed flow pumps by stud bolts.A suction casing is fitted between the pump & motor. Suction casing is fitted with strainer to protect the pump from coarse particles / sand in the fluid. Pumps with check valve (non-return valve) in option are supplied. Available with threaded particularly suitable for vertical installation in narrow deep wells. Additional bearings are fitted depending on the number of stages. Stainless Steel inserts are fitted to the impeller. The impeller hub is protected by stainless Steel inserts are fitted depending on the number of stages. Stainless steel inserts are fitted to the bowl in mixed flow version and in radial flow pumps available with Bronze bush in each stage casings. The impeller hub is protected by stainless steel inserts. This design improves the starting torque & has the effect that solid particles such as sand are propelled outside.

Salient Features Of V6 Submersible Pumps

	Premier manufacturing technology. The innovative mechanical design, combined with the use of an advanced manufacturing technology, results in a state-of-the-art 3-inch submersible pump line.

	Proven & Reliable Design For Critical Conditions.

	State of the art design: Delivers optimum performance and reliability in the toughest conditions.

	130, 200, 250,300,380,500,600,700,800,850,1000 & 1100 LPM models feature independent centrifugal impellers to provide smooth starting and long life.

	Rubber & bronze bearing provide low friction and high wear resistance.

	Easy assembling, dismantling. Easily serviceable pump & field rewindable motors. Suction screen and coupling are made of stainless steel.

	Standard 2 pole speed motor (2900 RPM).

	Once assembled, each 6” borehole submersible pump is individually tested to assure performance within design specifications.

	Kiwi Pumps uses non-contaminating, water filled motor design.

	High pumping efficiency for reduced running costs.

	Cost effective pumping systems: The hydraulic design is such as to enhance the efficiency, thus reducing energy consumption and making pumping systems more cost effective.

	Light weight and compact.

	Lip seal and sand guard to prevent ingress of impurities into the motor.

	Maintenance and service: with time some parts subject to wear may need replacement.

	The simplicity of the assembly concept allows for easy field service without the need of special tools minimizing the system down-time.

	The MOTOR is of non-toxic cooling bath type; asynchronous with squirrel cage rotor. Suction and delivery casing are in cast iron and if required in stainless steel & brass. Impellers and diffusers are in Noryl homologated for drinkable water use and are equipped with stainless steel inserts in correspondence of the wearable zones.

	Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.

	Suction Adapter: Designed to ensure proper pump/ motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.

	Pump Shaft: High tensile type 410 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.

	Powered for continuous operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

	Bearings with sand channels; all bearings are water lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.

	The motor adapter, coupling, check value and discharge head may be removed without disassembling the hydraulic stack.

Application Of V6 Submersible Pumps

	A combination of multistage centrifugal pumps and submersible motors, the 6” borehole submersible pump, is designed for applications like:

	Domestic water supply

	Water supply to high rise buildings

	Housing complexes, bungalows

	Gardens, farms and nurseries.

Operating Parameters

Name of Parts	V6 Borehole Submersible Pumps
H. P. Range	1.5 H.P. To 5.0 H.P. (Single phase version) 3.0 H.P. TO 25.0 H.P. (Three Phase version)
Head Range	Upto 430 Meters
Discharge At Duty Point	125 - 1200 LPM.
Max. Discharge	1500 LPM.
Max. Head / Stage	15 Meters (Radial Flow Model) 7 Meters (Mixed Flow Model)
Operating Voltage	160-240 volt (Single Phase) 200-350 volt (Three phase - LOW VOLT DESIGN) 250-450 VOLT (Three phase - STANDARD DESIGN)
Max voltage fluctuation	+15% -20%
Max. Start/Hour	20
Max. Temp. of Liquid	40° C
Max. Permissible Amount of Sand In The Water	50 Gram/Cubic Meter
Version	Single Phase – 220 Volt 50 Hz. Three phase - 415 volt 50 Hz.

Send Mail

Kiwi pumps is India’s largest manufacturer & exporter of 8” submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of 8” borehole submersible pumps that suit various kinds of user requirements.

Kiwi's 8" Borehole submersible pumps suitable for 8" or larger boreholes. Superior hydraulic design of impeller and diffuser make these pumps are most efficient. Utilization of top class material allow pumps to be reliable, long lasting and increases ites wear resistance towards sand. State of the art manufacturing process ensures optimum and consistent quality of these pump. Manufactured from corrosion & abrasion resistant materials. Close coupled to a submersible electric motor. Designed for flow rate upto 2300 LPM and head upto 300 meter.

Borehole submersible pumps for wells from 3 to 10- inch wells, with 2-pole electric motors. The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. In all domestic, industrial and agricultural applications, where it is required to life water out from below the ground and to push it above with pressure.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Design - V8 Submersible Pumps

Salient Features Of V8 Submersible Pumps

	Premier manufacturing technology. The innovative mechanical design, combined with the use of an advanced manufacturing technology, results in a state-of-the-art 3-inch submersible pump line.

	Proven & Reliable Design For Critical Conditions.

	State of the art design: Delivers optimum performance and reliability in the toughest conditions.

	400,500,600,700,800,900,1000,1100,1500,1600 & 1900 LPM models feature independent centrifugal impellers to provide smooth starting and long life.

	Rubber & bronze bearing provide low friction and high wear resistance.

	Easy assembling, dismantling. Easily serviceable pump & field rewindable motors. Suction screen and coupling are made of stainless steel.

	Standard 2 pole speed motor (2900 RPM).

	Once assembled, each 6” borehole submersible pump is individually tested to assure performance within design specifications.

	Kiwi Pumps uses non-contaminating, water filled motor design.

	High pumping efficiency for reduced running costs.

	Cost effective pumping systems: The hydraulic design is such as to enhance the efficiency, thus reducing energy consumption and making pumping systems more cost effective.

	Light weight and compact.

	Lip seal and sand guard to prevent ingress of impurities into the motor.

	Maintenance and service: with time some parts subject to wear may need replacement.

	The simplicity of the assembly concept allows for easy field service without the need of special tools minimizing the system down-time.

	The MOTOR is of non-toxic cooling bath type; asynchronous with squirrel cage rotor. Suction and delivery casing are in cast iron and if required in stainless steel & brass. Impellers and diffusers are in Noryl homologated for drinkable water use and are equipped with stainless steel inserts in correspondence of the wearable zones.

	Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.

	Suction Adapter: Designed to ensure proper pump/ motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.

	Pump Shaft: High tensile type 410 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.

	Powered for continuous operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

	Bearings with sand channels; all bearings are water lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.

	The motor adapter, coupling, check value and discharge head may be removed without disassembling the hydraulic stack.

Application Of V8 Submersible Pumps

	A combination of multistage centrifugal pumps and submersible motors, the 8” borehole submersible pump, is designed for applications like:

	Domestic water supply

	Water supply to high rise buildings

	Housing complexes, bungalows

	Gardens, farms and nurseries.

Operating Parameters

Name of Parts	V8 Borehole Submersible Pumps
H. P. Range	7.5 H.P. TO 75.0 H.P. (Three Phase version)
Head Range	Upto 300 Meters
Discharge At Duty Point	400 - 1900 LPM.
Max. Discharge	2500 LPM.
Max. Head / Stage	30 Meters (Radial Flow Model) 25 Meters (Mixed Flow Model)
Operating Voltage	250-450 VOLT (Three phase)
Max voltage fluctuation	+15% -20%
Max. Start/Hour	20
Max. Temp. of Liquid	40° C
Max. Permissible Amount of Sand In The Water	50 Gram/Cubic Meter
Version	Three Phase - 415 volt 50Hz

Send Mail

Submersible Dewatering Pumps

Kiwi Pumps is India’s largest manufacturer & exporter of submersible dewatering pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of submersible dewatering pumps that suit various kinds of project requirements.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi’s Submersible Dewatering Pumps are the most economical energy-efficient pumps for dewatering upto the lowest level.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Salient Features Of Submersible Dewatering Pumps

	Portable & self priming with bottom suction which enables the pump to dewater upto the lowest level.

	Motor available in 'F' class insulation also have option of submersible winding.

	Motor - 2800 rpm suitable for 230 VAC single phase for pumps upto 2HP and for entire range 415 VAC, 3Ø, 50Hz power supply.

	Motor is jacketed hence cooling takes place faster.

	Dual mechanical seal for protection of motors, pump side seal Tc Vs Tc.

	Cable of suitable rating x 4 core submersible cable; 10 meters length provided free with the submersible dewatering pump.

Application Of Submersible Dewatering Pumps

	Dewatering Submersible Pumps is designed for applications like:

	Lowest level dewatering.

	Dewatering high rise buildings.

	Dewatering Housing complexes, bungalows.

Material of Construction ›
Dewatering Submersible Pumps

	Upto 10 HP › The entire dewatering pump and motor body is made of aluminum alloy and outer stainless steel jacket, hence light weight and portable.

	15 to 30 HP dewatering pump are in fabricated MS construction. Impeller › Stainless Steel 410 Grade.

Send Mail

GNB - Submersible Effluent Pumps
Kiwi Pumps is India’s largest manufacturer & exporter of submersible effluent pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of submersible effluent pumps that suit various kinds of project requirements.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi’s Submersible Effluent Pumps are the most economical energy-efficient pumps for handling water with suspended solids upto 50 mm sphere.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Salient Features Of Submersible Effluent Pumps

	Corrosion resistant, Impact resistant, Lightweight, Continuous duty when fully submerged. Swing or vertical float option.

	For handling water with suspended solids upto 50 mm sphere

	Non Clog vortex impeller

	Vertical discharge with female flange

	Motor - 2800 rpm motor with 'F' class insulation, suitable for three phase power supply of 415 VAC, 50 Hz.

	Motor is jacketed & filled with the coolant. Thus the pump is suitable for working in worst working conditions, having capacity for longer period of dry running

	Dual ball bearings

	Dual mechanical seal - Motor side - Carbon Vs. Ceramic; Pump size - Silicon Carbide Vs. Silicon Carbide

	Cable of suitable rating x 4 core double sheathed submersible cable of 10 meters length provided as standard length. Extra cable length can be provided with prior information

Application Of Submersible Dewatering Pumps

	Effluent Pumps is designed for applications like:

	Graywater pumping

	Septic Tanks Effluent

	STEP Systems

	Water Transfer

	Dewatering

	Basement Sumps

Material of Construction › Submersible Effluent Pumps

	All Cast Iron with Stainless Steel Jacket

	Stainless Steel Hardware for easy maintenance

Send Mail

Submersible Sewage Pumps
Kiwi Pumps is India’s largest manufacturer & exporter of submersible effluent pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of submersible effluent pumps that suit various kinds of project requirements.

Our customers know that a one-size fits all approach just is not going to satisfy today’s demanding consumer. By utilizing Kiwi Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.

Kiwi’s Submersible Effluent Pumps are the most economical energy-efficient pumps for handling water with suspended solids upto 50 mm sphere.

Kiwi Pumps has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All Kiwi Pumps products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.

Salient Features Of Submersible Sewage Pumps

	Can handle liquids containing maximum solid sizes of 50mm, 80mm, 100mm sphere

	Motor - 'F' class insulated dry submersible motor suitable for 415 VAC, 50 Hz, three phase power supply with IP 68 protection

	Motor is having thermal overload protection

	Motor speed of 960, 1450 or 2800 rpm as per requirement suitable for pumping heads and discharge

	Motor is available with or without cooling jacket

	Submersible cable of suitable size is provided of 20 meters length

	Dual mechanical seal with pump side seal of Slilcon Cabide Vs. Silicon Carbide

	Horizontal discharge with suitable size flange or automatic guide rail coupling.

	Pump can be supplied with skirt base or with automatic guide rail coupling system for pulling out the pump from the pit without removing any nut or bolts.

Application Of Submersible Dewatering Pumps

	Effluent Pumps is designed for applications like:

	Graywater pumping

	Septic Tanks Effluent

	STEP Systems

	Water Transfer

	Dewatering

	Basement Sumps

Material of Construction › Submersible Effluent Pumps

	All Cast Iron for non jacketed type

	Heads - Upto 40 meters

	Capacities - Upto 600 cubic meters/hour

	Motor Ratings - Upto 35 KW

Send Mail

V8 Submersible Pumpsets

Design - V8 Submersible Pumps

Send Mail

Openwell submersible pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as.

No separate foundation is required.
Cooling is much better & hence longer life.
Convenient to move from place to place.
Foot – Valve is not required.
Suction head is eliminated.

Design - Openwell Submersible Pumps

	No Foundation – No pump house required.

	Pump operates under water, hence no foot valve – no priming – no suction problems- less possibility of burn-out of motor.

	Long life due to, cast iron construction – water lubricated journal & thrust bearings – dynamically balanced all rotating parts – motor designed to withstand wide voltage fluctuation.

	For safety, earthing terminal is provided.

Salient Features Of Openwell Submersible Pumps

	Dynamically balanced rotating parts.

	Flatter efficiency curve for efficient operation.

	Non-overloading power characteristic for safety of motor.

	Replaceable wearing parts.

	No need of priming or foot valve.

	Water shower arrangement for surface application.

	Highly durable water cooled rewindable motor.

	Single shaft for pump & motor ensures permanent correct line alignment.

	Foundation & installation not required.

	Stainless Steel Motor Body.

	Gun Metal bush bearing.

	Noiseless Operation.

	Maintenance free water lubricated bushes.

Application Of Openwell Submersible Pumps

Industrial & public water supply schemes, Domestic water supply, Lift irrigation schemes. Drip/ Sprinkler Irrigation schemes, fire lighting, booster application, cooling water. Circulation, Ornamental fountain installation and air conditioning plants. Dewatering of mines, offshore, platforms, etc.

Construction of Openwell Submersible Pumps

Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated.

Send Mail

Centrifugal Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as.

Low cost.
No centrifugal switch.

Salient Features of Centrifugal Monoblock Pumps

	Uni-casing no air lock problem.

	Balanced and rigged construction.

	No centrifugal switch.

	Less operational and maintenance cost.

Application Of Centrifugal Monoblock Pumps

Construction of Centrifugal Monoblock Pumps

Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated.

Send Mail

Domestic Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as.

Low cost.
No centrifugal switch.

Salient Features of Domestic Monoblock Pumps

	Uni-casing no air lock problem.

	Balanced and rigged construction.

	No centrifugal switch.

	Less operational and maintenance cost.

Application Of Domestic Monoblock Pumps

Construction of Domestic Monoblock Pumps

Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated.

Send Mail

Customized Submersible Pumps

Kiwi Pumps manufactures a variety of submersible pumps in 3”, 4”, 6” & 8”sizes with different flow & head suiting most of the regular use conditions. In addition horizontal openwell submersible pumpsets are also manufactured

In specific cases, where the customers needs are of special nature, Kiwi pumps involves in close discussions with the customers and provides solution by way of special design/ manufacture.



	Supply of complete SS pumps for salt manufacturers.

	Supply of complete SS pumps, as per the customer’s requirement for export purpose to Middle East countries.

Send Mail